1
CONTENTS
2
Model
Rated Voltage
8m
o o o o
-5 C~60 C(23 F~140 F)
3.0V(Dry batteries R03/LR03×2)
Environment
Signal Receiving Range
RG66B3(2H)/BGEF，RG66B4(2H)/BGEF
1
2
4
5
6
13
Handling the remote controller ......................................................
Remote controller Specifications...................................................
Function buttons .................. .........................................................
Remote LCD screen indicators .....................................................
How to use the basic functions........................................................
How to use the advanced functions ...............................................
Remote Controller Specifications
NOTE:
Buttons design is based on typical model and might be slightly different from the
actual one you purchased，the actual shape shall prevail.
All the functions described are accomplished by the unit. If the unit has no this
feature, there is no corresponding operation happened when press the relative
button on the remote controller.
When there are wide differences between Remote controller Illustration and
USER'S MANUAL on function description, the description of USER'S MANUAL
shall prevail.
,,
,,
,,
,,
,,
,,
Function Buttons
Before you begin using your new air conditioner, make sure to familiarize yourself with its remote
control. The following is a brief introduction to the remote control itself. For instructions on how to
operate your air conditioner, refer to the How to Use The Basic/Advance Functions section of
this manual.
NOTE：Please do not select HEAT mode if the machine you purchased is cooling only
type. Heat mode is not supported by the cooling only appliance.
Mode Fan
TimerTimer
Follow
me
LED
Self
clean
Turbo
ON/OFF
FAN
ON/OFF
Turns the unit on or off
MODE
Scrolls through operation
modes as follows:
AUTO
g
COOL
g
DRY
g
HEAT
g
FAN
ECO/SLEEP
TURBO
Enables unit to reach
preset temperature in
shortest possible time
TIMER
Sets timer to turn unit on
and off(see How to Use
Basic Functions for
instructions)
SWING
SWING
Starts and stops horizontal
louver movement.
Detects the people activities
in the room.
LED
Turns indoor unit s LED
display on and off.
,
FOLLOW ME
SELF CLEAN
Starts and stops the unit
self clean feature.
Starts and stops energy
efficient feature. If hod
down this button for
more than 2 seconds,
the sleep feature is
activated.
Temperature sensing and
room temperature display
button.
Starts and stops vertical
louver movement.
,
INTELLIGENT EYE
Selects fan speeds in
the following order:
AU% gg 20%
60%
40%
80%
F%(100%).
g
g
g
Press the Adjust
or button to increase
/decrease the fan
speed in 1% increments.
TEMP
TEMP
Increases temperature in
O O
1 F(0.5 C) increments for
each press. If pressing
and holding down this
button, the temperature
O O
will increase in 1 F(1 C)
increments.
Max. Temperature is
O O
86 F(30 C).
Decreases temperature
O O
in 1 F(0.5 C) decrements
for each press. If pressing
and holding down this
button, the temperature
O O
will decrease in 1 F(1 C)
decrements.
Min. temperature is
O O
60 F(16 C).
Model: RG66B3(2H)/BGEF
To Next Page
Loading...
