7
8
1. Press the MODE button to select DRY
mode.
2. Set your desired temperature using the
Temp or Temp button.
3. Press the ON/OFFbutton to start the unit.
,
NOTE: FAN SPEED can t be changed in
DRY mode.
1. Press the MODE button to select FAN
mode.
2. Press the FAN button to select the
fan speed in a range of Au%-F%, in
conjunction with Temp or Temp
button.
3. Press the ON/OFFbutton to start the
unit.
,
NOTE: You can t set temperature in FAN
mode. As a result, your remote control s
LCD screen will not display temperature.
DRY operation(dehumidifying)
FAN operation
,
1. Press the MODE button to select
HEAT mode.
2. Set your desired temperature using
the Temp or Temp button.
3. Press the FAN button to select the
fan speed in a range of Au%-F%, in
conjunction with Temp or Temp
button.
4. Press the ON/OFF button to start the
unit.
HEAT operation
Set the angle of air flow
NOTE: As outdoor temperature drops, the
performance of your unit s HEAT function
may be affected. In such instances, we
recommend using this air conditioner in
conjunction with other heating appliance.
,
How To Use The Basic Functions
How To Use The Basic Functions
3
3
1
1
2
2
4
1
3
2
Mode Fan
ON/OFF
Mode Fan
ON/OFF
Mode Fan
ON/OFF
TimerTimer
Follow
me
LED
Self
clean
Turbo
TimerTimer
Follow
me
LED
Self
clean
Turbo
TimerTimer
Follow
me
LED
Self
clean
Turbo
When the unit is on, press the swing button,
to activate the louver. Each time you press the
O
button, it will adjust the louver by 6 . Press the
button until the direction you prefer is reached.
If press and hold this button for more than 2
seconds, the louver will swing left and right
continuously.
When the unit is on, press the swing button,
to activate the louver. Each time you press the
O
button, it will adjust the louver by 6 . Press the
button until the direction you prefer is reached.
If press and hold this button for more than 2
seconds, the louver will swing up and down
continuously.
To Next Page
Loading...
