03
2. DISPLAY AND BUTTONS
Information are displayed when the remote controller is powered up.
Note:
All indicators shown in the gure are for the purpose of clear presentation. But during the actual
operation only the relative functional signs are shown on the display window.
2.1 DISPLAY
11%-20%
1%-10%
21%-30%
100%
AUTO
.................
Transmission Indicator
Lights up when remote
sends signal to indoor
unit
MODE display
Displays the current
mode, including:
(model dependent)
TIMER ON display
( )
Displays when TIMER
ON is set
TIMER OFF display
( )
Displays when TIMER
OFF is set
This fan speed can not be
adjusted in AUTO or DRY mode.
ON/OFF display
Appears when the unit is
turned on, and disappears
when the unit is turned off.
Battery display
Low battery detection
Temperature/Timer display
Displays the set temperature by
default, or timer setting when
using TIMER ON/OFF functions
• Temperature range:
16-30 ° C / 60-86 ° F
• Timer setting range:
0-24 hours
• Fan varg vendosjen
shpejtësisë: AU - 100%
This display is blank when
operating in FAN mode.
Fan speed display
Displays selected fan speed:
Silence feature display
Fresh feature display
Follow me feature display
Active clean feature display
Sleep mode display
Horizontal louver auto swing display
Vertical louver auto swing display
Breeze away display
Turbo mode display
LOCK feature display
Displays when X-ECO feature is activated.
To Next Page
Loading...
