Carrier RG67V/BGEF - Advanced Functions Guide; Swing and Louver Control; Fix and Breeze Away Features; ECO Sleep Mode Operation

07
4. HOW TO USE ADVANCED FUNCTIONS
Swing
Press Swing button
Swing
2s
Swing
The horizontal louver will swing up and down
automatically when pressing Swing button. Press again
to make it stop.
Keep pressing this button more than 2 seconds, the vertical
louver swing function is activated. (Model dependent)
Fix or
Breeze
Away
Press Fix button
Fix
Keep pressing this button more than 2 seconds, the Breeze
Away feature is activated and will avoid direct air flow
blowing on the body and make you feel indulging in silky
coolness.
The horizontal louver will move an angle of 6 degree for each press.
Press the button until the louver reach your prefer location.
Fix
2s
The Breeze Away feature is
energized.
The horizontal louver will move an angle of 6 degree for
each press.
Press the button until the louver reach your prefer
location.
Keep pressing this button more than 2 seconds, the
Breeze Away feature is activated and will avoid direct air
ow blowing on the body and make you feel indulging in
silky coolness.
ECO
Sleep
Press ECO Sleep button under Auto/Cool/Heat mode
ECO
Sleep
The set temp. will
increase(cooling) or decrease
(heating) by 1 °C/1 °F per hour
for the rst 2hs. Please refer to
the OWNER’S MANUAL for more
details.
This Sleep operation saves energy and improves night time comfort by synchronising with the body’s metabolism. The
sleep function is not available in Fan or Dry mode.
My
Mode
Press this button more than 2 seconds Press this button
2s
My
Mode
The unit will memorize the
current setting mode, Temp.,
fan).
My
Mode
The unit will restore to
the setting you made
last time.
My Mode function enable you to memorize or restore your favorite settings (mode, temperature and fan speed). The
default memorized setting is AUTO mode, 26 °C/78 °F and AUTO fan.