05
3. BASISFUNCTIES GEBRUIKEN
3.1 BASISBEDIENING
LET OP
Zorg voor gebruik dat het apparaat is aangesloten op een stroomvoorziening.
Modus
AUTO:
Selecteer de modus AUTO
Stel de gewenste temperatuur in Schakel de airconditioner in
Mode
NOTE:
1. In AUTO mode for heat pump system, the air conditioner can automatically choose the mode of
Cool, Heat or Fan by sensing the difference between the actual room temperature and setting
temperature.
2. In AUTO mode for cooling only system, the air conditioner can automatically choose the mode of
Cool or Fan by sensing the difference between the actual room temperature and setting temperature.
3. In AUTO mode, fan speed can not be set.
Turn on the air conditioner
OPMERKING:
1. In de modus AUTO voor het warmtepompsysteem kan de airconditioner zelf bepalen welke
modus te kiezen (Cool [koelen], Heat [verwarmen] of Fan [ventilator]) door de huidige
kamertemperatuur te meten en te vergelijken met de ingestelde temperatuur.
2. In de modus AUTO voor het koelsysteem kan de airconditioner zelf bepalen welke modus te
kiezen (Cool of Fan) door de huidige kamertemperatuur te meten en te vergelijken met de
ingestelde temperatuur.
3. In de modus AUTO kan de ventilatorsnelheid niet worden ingesteld.
Modus
COOL
of
HEAT
Selecteer de modus
COOL/HEAT
Stel de temperatuur in Stel de
ventilatorsnelheid in
Schakel de airconditioner
in
Mode
Fan
NOTE:
1. In AUTO mode for heat pump system, the air conditioner can automatically choose the mode of
Cool, Heat or Fan by sensing the difference between the actual room temperature and setting
temperature.
2. In AUTO mode for cooling only system, the air conditioner can automatically choose the mode of
Cool or Fan by sensing the difference between the actual room temperature and setting temperature.
3. In AUTO mode, fan speed can not be set.
Turn on the air conditioner
Modus
DRY
Selecteer de modus DRY Stel de temperatuur in Schakel de airconditioner in
Mode
NOTE:
1. In AUTO mode for heat pump system, the air conditioner can automatically choose the mode of
Cool, Heat or Fan by sensing the difference between the actual room temperature and setting
temperature.
2. In AUTO mode for cooling only system, the air conditioner can automatically choose the mode of
Cool or Fan by sensing the difference between the actual room temperature and setting temperature.
3. In AUTO mode, fan speed can not be set.
Turn on the air conditioner
OPMERKING:
In de modus DRY wordt de ventilatorsnelheid automatisch geregeld en kan daarom niet
worden ingesteld.
Modus
FAN
Selecteer de modus FAN Stel de ventilatorsnelheid in Schakel de airconditioner in
Mode
Fan
On/Off
Set your desired temperature
NOTE:
1. In AUTO mode for heat pump system, the air conditioner can automatically choose the mode of
Cool, Heat or Fan by sensing the difference between the actual room temperature and setting
temperature.
2. In AUTO mode for cooling only system, the air conditioner can automatically choose the mode of
Cool or Fan by sensing the difference between the actual room temperature and setting temperature.
3. In AUTO mode, fan speed can not be set.
Set your desired temperature
NOTE:
1. In AUTO mode for heat pump system, the air conditioner can automatically choose the mode of
Cool, Heat or Fan by sensing the difference between the actual room temperature and setting
temperature.
2. In AUTO mode for cooling only system, the air conditioner can automatically choose the mode of
Cool or Fan by sensing the difference between the actual room temperature and setting temperature.
3. In AUTO mode, fan speed can not be set.
Set your desired temperature
NOTE:
1. In AUTO mode for heat pump system, the air conditioner can automatically choose the mode of
Cool, Heat or Fan by sensing the difference between the actual room temperature and setting
temperature.
2. In AUTO mode for cooling only system, the air conditioner can automatically choose the mode of
Cool or Fan by sensing the difference between the actual room temperature and setting temperature.
3. In AUTO mode, fan speed can not be set.
To Next Page
Loading...
