Carrier RG67V/BGEF - Remote Control Buttons

04
GB
NOTE:
1. Above illustration shows all the features. For actual model, only the relevant parts are shown.
2. Buttons design might be slightly different from the actual one.
2.2 BUTTONS
On/Off
Press to start operation.
Press again to stop.
Mode
Press the mode button to switch the
mode in turn.
My Mode
Press to memorize or resume your
favorite pre-settings.
Swing
Starts and stops louver movement
(see page 7).
Fix
Used to set the desired up/down air
ow direction.
Pressing 2 more seconds to activate
or disable Breeze Away feature.
LED
Press to turn on/off the LED display.
Pressing 5 more seconds to altermate
the indoor display between setting
temperature and room temperature.
ECO Sleep
Press to enter Sleep Mode.
Pressing 2 more seconds to activate or
disable Fresh function.
Temperature UP
Increases temperature in 1 °C/1
°F increments. Max Temp. is 30
°C/86 °F.
Fan Speed
Press to select the fan speed.
Temperature Down
Decreases temperature in 1°
C/1 °F increments.
Min Temp. is 16 °C/60 °F
NOTE: Press together ˄ & ˅
buttons at the same time for
3 seconds will alternate the
temperature display between
the °C & °F scale.
X-ECO
Press to enter the energy
efcient mode(see page 10).
TIMER ON
Press to set the timer on or off.
High Power(Turbo)
Press to activate/disable the
High power function. Keep
pressing 2 more seconds to
activate/disable Active Clean
function.
Follow Me
Press to activate or clear the
Follow me function. Keep
pressing 7 more seconds to
activate or disable Memory
feature of Follow Me function.
LED
Mode
Fan
Swing
My
Mode
Fix
Follow
Me
High
Power
ECO
Sleep
X-ECO
Timer