Carrier RG67V/BGEF - Page 76

05
3. SÅDAN BRUGER DU GRUNDLÆGGENDE FUNKTIONER
3.1 GRUNDLÆGGENDE BETJENING
OBS!
Inden betjening skal du sørge for, at enheden er tilsluttet, og der er strøm til
rådighed.
AUTO-
modus
Vælg AUTO-modus
Indstil den ønskede temperatur Tænd airconditionanlægget
Mode
Set your desired temperature
NOTE:
1. In AUTO mode for heat pump system, the air conditioner can automatically choose the mode of
Cool, Heat or Fan by sensing the difference between the actual room temperature and setting
temperature.
2. In AUTO mode for cooling only system, the air conditioner can automatically choose the mode of
Cool or Fan by sensing the difference between the actual room temperature and setting temperature.
3. In AUTO mode, fan speed can not be set.
NOTE:
1. In AUTO mode for heat pump system, the air conditioner can automatically choose the mode of
Cool, Heat or Fan by sensing the difference between the actual room temperature and setting
temperature.
2. In AUTO mode for cooling only system, the air conditioner can automatically choose the mode of
Cool or Fan by sensing the difference between the actual room temperature and setting temperature.
3. In AUTO mode, fan speed can not be set.
Turn on the air conditioner
BEMÆRK:
1. I AUTO-modus til varmepumpeanlæg kan airconditionanlægget automatisk vælge tilstanden Køle,
Varme eller Blæser ved at registrere forskellen mellem den faktiske rumtemperatur og den indstillede
temperatur.
2. I AUTO-modus til kun køleanlæg kan airconditionanlægget automatisk vælge Køle- eller Blæser-
modus ved at registrere forskellen mellem den faktiske stuetemperatur og den indstillede temperatur.
3. I AUTO-modus kan blæserhastighed ikke indstilles.
KØLE
eller
VARME-
tilstand
Vælg KØLE/VARME-modus Indstil temperaturen Indstil blæserhastigheden Tænd airconditionanlægget
Mode
Set your desired temperature
NOTE:
1. In AUTO mode for heat pump system, the air conditioner can automatically choose the mode of
Cool, Heat or Fan by sensing the difference between the actual room temperature and setting
temperature.
2. In AUTO mode for cooling only system, the air conditioner can automatically choose the mode of
Cool or Fan by sensing the difference between the actual room temperature and setting temperature.
3. In AUTO mode, fan speed can not be set.
Fan
NOTE:
1. In AUTO mode for heat pump system, the air conditioner can automatically choose the mode of
Cool, Heat or Fan by sensing the difference between the actual room temperature and setting
temperature.
2. In AUTO mode for cooling only system, the air conditioner can automatically choose the mode of
Cool or Fan by sensing the difference between the actual room temperature and setting temperature.
3. In AUTO mode, fan speed can not be set.
Turn on the air conditioner
TØR-
modus
Vælg TØR-tilstand Indstil temperaturen Tænd airconditionanlægget
Mode
Set your desired temperature
NOTE:
1. In AUTO mode for heat pump system, the air conditioner can automatically choose the mode of
Cool, Heat or Fan by sensing the difference between the actual room temperature and setting
temperature.
2. In AUTO mode for cooling only system, the air conditioner can automatically choose the mode of
Cool or Fan by sensing the difference between the actual room temperature and setting temperature.
3. In AUTO mode, fan speed can not be set.
NOTE:
1. In AUTO mode for heat pump system, the air conditioner can automatically choose the mode of
Cool, Heat or Fan by sensing the difference between the actual room temperature and setting
temperature.
2. In AUTO mode for cooling only system, the air conditioner can automatically choose the mode of
Cool or Fan by sensing the difference between the actual room temperature and setting temperature.
3. In AUTO mode, fan speed can not be set.
Turn on the air conditioner
BEMÆRK:
I TØR-modus kan blæserhastigheden ikke indstilles, da den allerede er automatisk styret.
BLÆSER-
modus
Vælg BLÆSER-modus Indstil blæserhastigheden Tænd airconditionanlægget
Mode
Fan
On/Off