Why won't the spinner shaft rotate in my Carrier TAYLOR 60?
If the spinner shaft in your Carrier Freezer won't rotate to blend syrup, the flexible cable may be broken (replace the cable), a pin may be missing in the female quick disconnect (replace the disconnect), or the spinner motor may be out on thermal overload due to inadequate lubrication of the spinner shaft (lubricate the entire length of the shaft).
Why is the drive shaft stuck in the gear box coupling of my Carrier TAYLOR 60?
If the drive shaft is stuck in the gear box coupling of your Carrier Freezer, it could be because lubrication is on the hex end of the shaft (do not lubricate the hex end). Alternatively, the corners of the hex end of the drive shaft could be rounded (replace defective drive shaft), or the coupling corners on the gear box could be rounded (replace the gear box).
Why is the head pressure too low in my Carrier Freezer?
Low head pressure in your Carrier Freezer could indicate a shortage of refrigerant. You should repair the leak and recharge the system.
Why is the mix hopper in my Carrier TAYLOR 60 Freezer too cold?
If the mix hopper in your Carrier Freezer is too cold, you may need to adjust the temperature.
Why does the air compressor in my Carrier TAYLOR 60 Freezer run too often?
If the air compressor in your Carrier Freezer runs too often, there may be an air leak in the system. Use a soap solution to locate the leak.
Technical details and measurements for Model 60 and Model 62 shake freezers.
Operating parameters, pressures, and settings for optimal performance.
Guidelines for proper setup, electrical, and plumbing connections.
Mechanism for monitoring and controlling product thickness via torque sensing.
System for automatically lifting the draw arm during operation.
Switches controlling beater motor, spinner motor, and syrup solenoids.
Components and process for blending and dispensing flavors with the base mix.
Common problems and their probable causes and remedies.
Systematic approach to diagnosing electrical faults.
Details on warranty coverage and disclaimers for parts and components.
Illustrated list of operator-accessible parts for Model 60.
Illustrated list of operator-accessible parts for Model 62.
Visual breakdown of machine components for identification.
Comprehensive catalog of all available replacement parts.
Schematics detailing electrical connections and circuits for troubleshooting.
To Next Page
General
