Operation & Service Manual
Carrier Transicold Europe 31/03/07 Viento - Installation/Rev- #31/54
6. Remove the Hot Gas valve (HGV) solenoid to connect the
HOT GAS LINE hose easily.
7. Connect the HOT GAS LINE fitting to the Hot Gas valve.
8. Re-install the Hot Gas valve solenoid.
9. Connect the LIQUID LINE HOSE to the filter drier.
RECOMMENDATIONS
45° fitting recommended if lateral outlet needed.
GENERALY, use the appropriate fitting
depending on the installation.
Installation Unit connection Refrigeration hoses
To Next Page
Loading...
