EasyManua.ls Logo

Carrier Viento 200 - Drain Water Pipe and Evaporator Sides

Carrier Viento 200
54 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation & Service Manual
Carrier Transicold Europe 31/03/07 Viento - Installation/Rev- #36/54
10. Put the drain water pipe in place.
RECOMMENDATIONS
A descent of MINIMUM 10 cm must be applied
between the drain water hoses pipe and the
hoses inside the body to help to drain water out.
11. Connect the drain water hoses between drain water
pipes and evaporator water tubes.
12. Fix tie-wrap sockets to maintain drain tubes in the right
position.
13. Insulate the two holes with silicone.
14. Instal the two evaporator sides.
Installation Evaporator connection Drain pan

Related product manuals