7
FACTORY OPTIONS AND/OR ACCESSORIES (cont.)
Motormaster Head Pressure Controller
The Motormaster motor controller is a low ambient, head
pressure controller kit that is designed to maintain the
unit’s condenser head pressure during periods of low
ambient cooling operation. This device should be used as
an alternative to economizer free cooling when
economizer usage is either not appropriate or desired. The
Motormaster will either cycle the outdoor fan motors or
operate them at reduced speed to maintain the unit
operation, depending on the model.
Alternate Motors and Drives
Some applications need larger horsepower motors, some
need more airflow, and some need both. Regardless of the
case, your Carrier expert has a factory installed
combination to meet your application. A wide selection of
motors and pulleys (drives) are available, factory
installed, to handle nearly any application.
Thru--the--Base Connections
Thru--the--base connections, available as either an
accessory or as a factory option, are necessary to ensure
proper connection and seal when routing wire and piping
through the rooftop’s basepan and curb. These couplings
eliminate roof penetration and should be considered for
main power lines, as well as control power.
Electric Heaters
Carrier offers a full line of field--installed accessory
heaters. The heaters are very easy to use and install. All
are pre--engineered and certified.
Hinged Access Panels
Allows access to unit’s major components with
specifically designed hinged access panels. Panels are:
filter, control box, fan motor and compressor.
50HCQ
To Next Page
Loading...
