Carrier WTC-RCI-DC Series - Controller Settings and Operations; Setting Comfort Temperature; Setting Fan Speed Control

3
ENGLISH
Default Screen Settings
Fan Speed
Comfort Temperature
The default screen may vary according to
installer conguration and additional options
such as lights control, blinds control, etc.
The default screen displayed on the user
interface may inform you about the
current room temperature or the comfort
temperature, or neither of them.
To achieve better comfort, it is possible to
control the comfort temperature when the
status of the room is occupied.
The comfort temperature is adjusted in steps.
Comfort temp. steps: -4 / -3 / -2 / -1 / 0 / 1 / 2 / 3 / 4
To set the comfort temperature
■ Press the Up button or the Down button
to set the comfort temperature step.
Example:
Room temp. 21.0°C
Mode: Cooling
Occupancy: Occupied
Fan speed: Medium
No temp. displayed
Mode: Satised
Occupancy: Occupied
Fan speed: Off
Comfort temp. step:
+ 4
Comfort temp. 19.5°C
Mode: Cooling
Occupancy: Occupied
Fan speed: Low
Example:
■ When the comfort temperature step is
set, press the Menu button to go
to the next screen or wait 5 seconds to
go back to the default screen.
Note: Comfort temperature can be
adjusted only when the status of the
room is occupied.
To modify settings
■ Press the Menu button to access the
Edit menu.
■ Press the Up button or the Down button
to edit the displayed value.
■ Press the Menu button again to access
the next Edit screen.
■ On the Exit screen:
- Press to go back to the first Edit screen.
- Press or to return to the default screen.
The default screen is displayed automatically
after 10 seconds without any user action.
All changes are effective immediately.
No validation is required.
Unoccupied: Fan speed is adjusted
automatically.
Occupied: Fan speed is adjusted
automatically to achieve optimum comfort
OR set manually.
To set the fan speed
■ Press the Menu button repeatedly
until the Fan speed screen appears.
■ Press the Up button or the Down button
to set the fan speed.
Low speed = 1
Medium speed = 2
High speed = 3
Fan Auto: Fan speed is adjusted
automatically in order to provide
optimum comfort
Fan Off
■ When the fan speed is set, press to go
to the next screen or wait 10 seconds to go
back to the default screen.
Example:
Fan speed: OFF
Fan speed: Medium
Note: Fan speed can be adjusted only when
the status of the room is occupied.