Carrier WTC-RCI-DC Series - Blinds Control Operations; Adjusting Blinds Position and Tilt

6
ENGLISH
Order No.: 10071, 10.2016 - Supersedes order No.: 10071, 04.2015.
Blinds Control
Depending on prior conguration and the
type of blinds present in your room, you
may be able to adjust the position of blinds
as well as control the tilt mechanism.
To adjust the blinds
■ Press the Menu button repeatedly
until the Blinds screen appears.
■ Press the Up button or the Down
button to select the blinds group
number.
■ Press or to set the blinds position.
UP: Raise blinds.
STOP: Stop blinds raising/lowering.
DOWN: Lower blinds.
STOP: Stop blinds raising/lowering.
■ Press or to set the blinds rotation.
UP: Rotation UP.
STOP: Rotation stopped.
DOWN: Rotation DOWN.
STOP: Rotation stopped.
Example:
Selecting one zone (zone number displayed).
Blinds group
No. 1 controlled
All blinds groups
controlled
Selecting all zones (ALL means that all blinds
groups will be managed at the same time).
BLINDS POSITION
■ Once the blinds group is selected, press
to access the blinds position
command.
TILTING
■ Press to access the tilting command.
■ When the blinds rotation is set, press
to go to the next screen or wait 10 seconds
to go back to the default screen.