Carrier XCT7 40VCW217FQEE - Energy Saving Mode; Filter Cleaning Alert Management; 10°C Heating Functionality; Air Deflector Control

Then Press key for 15s to switch to Celsius, the interface will display 16°C (when energy saving function is set,
its lowest limit value of Celsius will be displayed).
Energy saving
(1) Press MENU key to enter function, use or key to switch between di󰀨erent functions. Switch to function, then
press MENU key again to turn on energy saving function. If the function is turned on, icon will be displayed
in the main interface.
When the energy saving function is set, press MENU key to enter function cycle and choose , then press
MENU key to exit energy saving function.
(2) If the energy saving function is turned on, the adjustment value of the setting temperature for cooling/dry/heating
mode will be limited. The energy saving default parameters are 23°C (the lowest temperature limit of cooling and
dry mode) and 26°C (the highest temperature limit of heating mode).
(3) The energy saving parameters can be changed.
In cooling mode, set temperature to 30°C, long press FAN key for 5 seconds to enter energy saving parameter
of cooling/ dry mode setting., The parameter will be displayed in the top-left corner. You can use or key to
adjust parameter, and the parameter adjustment range is from 16 to 30. After adjustment, you need to press
MENU key to conrm changes.
In heating mode, set temperature to 16°C, long press FAN key for 5 seconds to enter energy saving parameter
of heating mode setting. The parameter will be displayed in the top-left corner. You can use or key to adjust
parameter, and the parameter adjustment range is from 16 to 30. After adjustment, press MENU key to conrm
changes.
Filter Cleaning
When lter cleaning icon is displayed, the icon will appear in function cycle. Press MENU key to enter function
cycle, use or key to switch between di󰀨erent functions. Switch to icon, press MENU key again to cancel the
display of icon.
10°C heating function (applicable for some models)
(1) Only in heating mode, this function is appears in function cycle.
(2) Press MENU key to enter function cycle, use or key to switch between di󰀨erent functions. When it switches
to the 10°C heating function, 10°C will ash in the temperature display area. Press MENU key to conrm.
(3) To turn o󰀨 the 10°C heating function, in the function cycle, press MENU key.
(4) In the state of 10°C heating function, if you change modes or adjust temperature set point, you will exit the 10°C
heating function.
Four-sided air deector (only valid for part of models)
(1) For 4-way/Round-way Cassette, the icon and the icon will be displayed in the main interface.
(2) Press MENU key to select the air deector to be set (By pressing MENU key, you can switch between the air
deector 1,2,3,4 as well as the simultaneous control.). The air deector ashes to indicate that it is selected.
When selecting a certain air deector, you can use or key to adjust its swing angle.
(3) After adjustment, you can press MODE / FAN / TIME key or wait 10 seconds to exit the settings.
Motion sensing (applicable for some models)
(1) Motion sensing function includes
A
,
B
and
A
(Follow): Swing direction follows people.
Operation
8
ENGLISH