Zone Manager
GB - 8
Programming zone periods
WARNING:
Each zone can have a maximum of 4 periods.
• Press the "PROGRAM" button.
"
ZONE 1" and "PERIOD 1" are first displayed for the current day.
The current time programmed for that period will flash
indicating a change can be mode if desired.
1st period programming zone 1:
• Press "up" or "down" buttons to set the time according to
your personalized schedule.
• Premere il tasto "
SET TIME/TEMP".
Sul display lampeggia il valore della temperatura.
• Press "up" or "down" buttons to adjust the temperature
setting to match your personalized schedule.
2nd, 3rd, and 4th period programming:
• Press "
NEXT PERIOD".
The next period appears on the display (
PERIOD 2).
• Repeat the operations for the first period to program the time
and temperature.
• Do the same for periods 3 and 4.
• If a period is not needed select the time as shown that can be
reached after 23:45.
• Press the "
END PROGRAM" button to exit programming.
System programming
up
down
up
down
To Next Page
Loading...
