Carrier Zone Manager User Manual

Zone Manager
GB - 7
ENGLISH
System programming
Access to programming
IMPORTANT:
Before you program your Zone Manager, take a moment to
plan you temperature schedule.
Each day of the week is divided into four time periods: 1, 2,
3, and 4. For each time period, enter a start time and a
setpoint in the appropriate block.
• Press the "PROGRAM" button.
The word "
PROGRAMMING" appears on the display confirming
access to the programming mode and the time blinks.
• Perform the desired operations.
• Press the "
END PROGRAM" button to exit programming.
Choosing the day to program
• Press the "PROGRAM" button.
• Press the "
NEXT DAY" button.
Each time the button is pressed a successive day of the week
is displayed.
• To exit programming mode press the "
END PROGRAM" button.
Choosing the zones to program:
• Press the "PROGRAM" button.
• Press the "
NEXT ZONE" button.
The chosen zone appears on the display.
• To exit programming mode press the "
END PROGRAM" button.

Carrier Zone Manager Specifications

General

Brand	Carrier
Model	Zone Manager
Category	Control Systems
Language	English