Carrier Zone Manager - System Override - Temporary Setting Changes; Zone Navigation During Temporary Override; Provisional Temperature Adjustments

17 pages

To Next Page

To Previous Page

GB - 14

Zone Manager

System override

If the "NEXT ZONE" button

is pressed to see the zone 2 settings, the display remains

blocked on zone 1.

All zones will continue to follow the parameters of zone 1.

For to change the value of temperature:

• Press the "up" button (temperature = 22

The display changes the value of temperature (22

The temperature of all zones will be 22

ATTENTION:

To return to normal operations with all the zones

controlled with their respective programming press the

"ZONE ALL" button once .

3. "up" or "down" buttons:

• Press the "up" or "down" button.

The value of temperature choosed provisionally change.

down

Other manuals for Carrier Zone Manager