Carrier Zone Manager - System Programming Operations; Programming Operating Modes; Copying Zone Schedules

Zone Manager
GB - 9
ENGLISH
Operation mode programming
• Press the "PROGRAM" button.
• Press the "
NEXT DAY" button to select the day to program.
• Press the "
MODE" button.
Each press changes the programming mode.
ON The selected zone units are switched on.
OFF The selected zone units are switched off.
SETBACK The selected zone units are in "energy saving" mode.
EXAMPLE:
Setpoint: 12,00 with "
SETBACK" function inserted.
WARNING:
The "
SETBACK" function can only be selected if "AUTO"
operation is selected (see "Setting mode operation").
• Continue programming selecting the zone and periods for
setpoint definition.
Copying a zoning schedule
To assist in creating schedules for all your zones, the Zoning
System Manager includes a "
COPY ZONE" button.
When programming, this eliminates the need to re-enter
identical information for each zone.
• Press the "
PROGRAM" button. Program a zone schedule.
• Press the "NEXT ZONE" button to move to the next zone.
• Press the "
COPY ZONE" button.
The previous zone's schedule will be copied into the zone.
Continue copying the programming for the other zones of
interest.
• Press the "
END PROGRAM" button to exit programming.
NOTE:
This function copies all the days of the previous zone into the
current zone.
System programming