Carrier Zone Manager - System Programming Data Transfer Utilities; Copying Zone Setpoints and Daily Programs

GB - 10
Zone Manager
EXAMPLE:
We want to copy the setpoints of zone 1 into zone 2 or a zone
successive to it.
• Press the "
PROGRAM" button.
Zone 1 with the time blinking appears on the display.
• Press the "
NEXT ZONE" button to move to the next zone.
Zone 2 with the time blinking appears on the display.
• Press the "
COPY ZONE" button.
• Press the "
END PROGRAM" button to exit programming.
Day copying
When all the setpoints for a day have been programmed the
day program can be copied to another day. Two ways exist:
COPYING ONE DAY ONTO THE NEXT IN THE SAME ZONE
• Select the day you want to copy.
• Press "
NEXT DAY".
The day following the day to be programmed appears on the
display.
• Press "COPY DAY".
The programming is copied for all the setpoints of the four
periods of the new day.
• Press the "
END PROGRAM" button to exit programming.
COPYING THE SAME DAY OF THE WEEK FROM ONE ZONE
TO THE NEXT
Select the day and zone to be copied on the display.
• Press the "
NEXT ZONE" button to move to the next zone.
• Press "COPY DAY".
The programming is copied for all the setpoints of the four
periods of the new day.
• Press the "
END PROGRAM" button to exit programming.
System programming