Carrier ZS - Document Revision History

Document revision history
ZS Sensors Carrier Proprietary and Confidential CARRIER CORPORATION ©2017
Installation Guide All rights reserved
40
Important changes to this document are listed below. Minor changes such as typographical or formatting errors are not
listed.
Date
Topic
Change description
Code*
7/26/17
Rnet configuration
Changed version 3.3.11 to 3.4.02 and changed v03.05.03 to
03.05.02.
X-TS-AP-F
5/31/17
Specifications for:
ZS pipe clamp-on sensor
ZS immersion sensor
ZS outdoor air sensors
Corrected specification for Sensing element.
Removed Environmental operating range specification.
X-O-AR-E
5/10/17
Troubleshooting a ZS Pro or ZS Pro-F
Added Effective Setpoints Fields descriptions
X-TS-EE-BR
1/30/17
Specifications for ZS zone sensors
Added CO
2
sensor type
X-TS-JM-F
1/19/17
Entire document
Major revisions to add a motion sensor to a ZS Pro, duct sensors,
pipe sensor, immersion sensor, and outdoor air sensors.
X-D
3/10/16
Specifications
Added drift statement to Humidity specification.
X-TS-EE-F
5/26/15
CO
2
sensor installation
New topic
X-TS-RB-BR
11/24/14
Power requirements
Made corrections to wiring diagram
X-TS-JM-O
8/6/14
To address a ZS Sensor
Changed Default address from 0 to 1.
C-D
* For internal use only
Document revision history