2WD Buggy DAZZLER
Additional items
Necessary accessories
Fuel for nitro powered model cars with different percentages of nitromethane.
The lubrication of the engine depends on the percentage of oil, the flammability of
the fuel increases with the percentage of nitro methane.
There are different kinds of fuel available with a different percentage of nitro methane,
depending on usage.
You can buy the fuel for model cars in retailer shops for modelling.
Attention! Avoid skin contact and avoid swallowing!
Liter Nitromethane No. Application
1,0
10% 13934 Breaking-in phase /
Beginners
1,0
16% 13935 Normal
2,5
16% 13936
1,0 25% 13937 Race
2,5
25% 13938
After-run oil No. 905044
After-run-oil protects the cylinder against corrosion. After driving operation put some drops of after-run oil into the carburet-
tor and into the combustion chamber of the engine.
Air filter oil No. 32648
To prevent even fine dust from penetrating into the engine via the air intake wash the air filter and oil it afterwards with air filter oil
before you start driving
Glow plugs
Glow plugs are consumable parts. Choose a glow plug according to the type of engine, the type of fuel and the
temperature of the environment. Never use glow plugs for 4-stroke plane engines! A wrong glow plug lets the
engine run incorrectly and complicates the tuning. In the worst case it destroys the engine.
Glow plug Engine type Fuel type Temperature Item-Nr.
Glow plug Rossi R2 hot 2 - 3,5 ccm w/o Nitro 0°C - +15°C 905006
Glow plug Rossi R6 cold universal 10 - 13% Nitro +10°C - +25°C 905010
Glow plug Rossi R7 cold universal 13 - 15% Nitro +15°C - +30°C 905011
Glow plug Rossi R8 extra cold universal 15 - 30% Nitro +20°C - +40°C 905012
Recommended tools:
- Philips screw driver,
big and small
- Modelling knife
- Scissors
- Screw driver
for the setting of the
carburettor
Fuel bottle
Use a special fuel bottle in order
to avoid spilling fuel
- Needle nose pliers
- Side cutter
- Hexagonal wrenches,
different sizes
To Next Page
Loading...
