Need help?Do you have a question about the CARVIN X1 and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Wattage | 100W |
| Effects Loop | Yes |
| Effects | Reverb |
| Type | Guitar Amplifier |
| Impedance | 4, 8, 16 ohms |
| EQ Bands | 3-band (Bass, Mid, Treble) |
Delivers classic X-100B sounds in a compact pedal format with modern features.
Tone generation and overdrive from 12AX7 tubes in operating conditions like X100B.
Four footswitches for Channel, Gain, EQ, and Bypass, with color-coded LEDs.
Wide range BASS, MID, TREBLE, PRESENCE and Rhythm BRIGHT switch.
Emulates 2x12/4x12 speaker response for silent practice or direct recording.
A 1-watt amplifier capable of driving standard guitar cabinets.
Features two 12AX7 tubes and key controls like MASTER, BASS, MID, TREBLE, PRESENCE.
Details Rhythm/Lead channels, BRIGHT switch, and 5-Band Graphic EQ functionality.
Lists Input, Output, Loop Send/Return, Cab Voiced Out/Phones, and Speaker jacks.
Four footswitches for BYPASS, GEQ, GAIN, and CHANNEL selection.
Specifies power adapter requirements, physical dimensions, and unit weight.
Guide to connect instrument, power, and select initial settings for playing.
Explains how LED lighting indicates Channel and Graphic EQ status.
Details the operation of BYPASS/LOOP, GEQ, GAIN, and CHANNEL footswitches.
Sets the overall output volume for all output jacks.
Guidance on adjusting EQ for desired sound character.
Setting Rhythm channel volume and using the BRIGHT switch.
Setting LEAD channel volume and understanding DRIVE/GAIN effects.
Affects tube harmonics and saturation; use with GAIN for overdrive.
Explains GAIN mode for increased drive, distortion, and its LED indicator.
How to use the 5-band EQ faders for boost or cut.
Using small switches to enable EQ for LEAD or RHYTHM channels.
Selects full BYPASS or LOOP bypass via a small switch.
Red LED for BYPASS, Green LED for LOOP status.
Standard 1/4" jack for connecting instrument.
For connecting the included 12VDC AC adapter.
Drives guitar speakers directly; supports multiple speakers (min 4 Ohms).
For connecting external effects pedals in the effects loop.
Connects to guitar amps, power amps, or effects return jacks.
Uses 3G circuit to emulate 2x12" or 4x12" response for direct output.
Select between 2x12" or 4x12" cabinet response with a top panel switch.
Normal operation may cause the chassis to become warm.
Tips to control feedback and noise on the lead channel.
Instructions for safely replacing the 12AX7 preamp tubes.
Alerts regarding risk of electric shock and opening the unit.
Instructions for proper use, servicing, and equipment maintenance.
To Next Page
