CAS CUW Series - For GLP;GMP;ISO Conformance; Calibration Report Setting; Balance ID Setting

56
10.4 For GLP/GMP/ISO Conformance
These settings should be made by the administrator.
10.4.1 Calibration Report Setting
Turns the calibration report function ON/OFF. Use this to generate and output a calibration
report as for GLP, GMP, or ISO9000. An electronic printer (optional accessory) is required to
print the report.
To create calibration report, Select menu item 68 .
To turn off calibration report function, Select menu item 69 .
10.4.2 Balance ID Setting
Individual balances can be identified by the serial number on the main body of the balance.
The user can add a four-digit ID number to the calibration report.
Select menu item 70 . Set a 4-digit number from “0000” to “9999”.