95
(vii) Commands of special functions
CAL Enters Span Calibration mode.
C18 Enters Span Calibration mode.
LOCK Sets menu lock.
RELEASE Releases menu lock.
TIME Readout of date and time.
ADJCLK Adjusts ± 30 seconds.
RSTMN Menu reset.
MENU= Sets arbitrary menu.
{ Echo back.
} Echo back.
[α] Sets to Multi-Connection mode. (α represents a lower-case alphabet character.)
For Multi-Connection mode, refer to Section “15.2.4 Multi-Connection Mode”.
(5) Compatible commands with Mettler Toledo® PR and SR series Electronic Balances
S One time output at a stable state
SI Immediate one time output
SIR Continuous output
SR Continuous output at a stable state
T Taring after stabilized
TI Immediate taring
Z Zero setting (same as immediate taring)
(6) Compatible commands with Sartorius® IS series Electronic Balances
<ESC>P One time output
<ESC>T Taring
<ESC> indicates escape code (1BH).
To Next Page
Loading...
