17
16
ERROR MESSAGE
An error of the initial zero range
Problems on Analog Module
Overload on the platter
Unstable conditions of scale
Set the platter empty.
Try to turn OFF and ON the scale.
Call your CAS dealer if still problems.
Remove it from the platter
Do not put somthing exceeding maximum
capacity on the platter
Make the scale stable conditions
ERROR REASONS SOLUTIONS
Err
Init
OFL
UNStA
BATTERY MAINTENANCE
LOW BATTERY WARNING
When the battery is low the display shows the "BAT" sign.
You can replace the battery new one.
If you still use the scale without replacing the battery the scale may provide
incorrect result on measurement.
How to connect the ground wire.
Connect ground wire to external ground
*Connect ground wire with washer hex bolt
from pole connection.
*NOTE : Specifications are subject to change for improvement without notice
DL-60 DL-100 DL-150
60.00kg 100.00kg 150.00kg
20g 50g 50g
1/30,000 1/20,000 1/30,000
1/3,000 1/2,000 1/3,000
5 digit LCD
STABLE, ZERO, kg, lb, oz, BAT
ZERO, TARE, MODE, ON/OFF
General Weighing, Hold Function
Counting Function, Comparator Function
365
620 730mm 420
655 710mm
355
465mm 395 520mm
18kg 15kg
1.5V
6 (option C size battery) or 9V adapter
about 5.8V
-10°C
40°C
1.5V
6 (C size battery is optional)
SPECIFICATIONS
MODEL
CAPACITY
MIN. DIVISION
INTERNAL RESOLUTION
EXTERNAL RESOLUTION
DISPLAY
SYMBOLS
KEYS
FUNCTIONS
DIMENSIONS
PLATTER SIZE
WEIGHT
POWER
MINIMUM VOLTAGE
OF THE BATTERY
TEMPERATURE
OPTION
To Next Page
Loading...
Need help?
General
