■ KEY FUNCTIONS
KEY FUNCTIONS
Used to set the zero point to 0.00 or 0.000.
Used as ENTER key in Setup Mode.
Used to enter a tare weight and used to cancel a tare weight.
Used as ESC key in Setup Mode.
Used to switch between lb and kg.
OPERATIONS
1. General Weighing
■ The display indicates if the scale is at zero or if there is a tare entered into the
scale by way of a ZERO and NET.
■ When the display is not zero though there is nothing on the platter, press the
ZERO key.
① Turn on the power. The display shows 0.00 or 0.000.
Make sure that ST(Stable) and ZERO lamps are On.
② Place an item on the platter. When the ST(Stable) lamp
is 0n, read the weight.
To Next Page
Loading...
