CAS PD-2 - Error Message; Error Codes and Solutions

10
Table 1 .
Description
MENU
4-Bit Parallel RS-232 Serial
ECR-TYPE 0
TEC 4 Digit 4Bit Parallel
(New kg)
ECR-TYPE 1
TEC 4 Digit 4Bit Parallel
(Old kg)
Most POS, ECRs and Some
TEC POS System
ECR-TYPE 2
Sharp ER-Axxx, New Sanyo
ECRs using RS-232 others
ECR-TYPE 3
Most POS System
ECR-TYPE 4
Samsung, CRS, NCR2170 and
other ECRs
ECR-TYPE 5
NCI General.
Most POS Software
kg/lb key

ECR-TYPE 6
Universal 4 Bit Parallel
Samsung ER-670
※ Serial Communication
 9600 Baud Rate, 7 Date bit, Even Parity. 1 Stop bit
ERROR MESSAGE
ERROR REASONS SOLUTIONS
Err Failure of A/D Module Call your CAS dealer
Err 1 An error of initial zero range
Set the platter empty
Make sure there is a platter on the scale