CAS Poscale - Error Messages

112
Table 15 : Error Messages
Error Message
on Display
Description Solution
TOO HOT Printer is overheated.
Please take time to cool off
the printer.
BATTERY
LOW
ERROR
Battery voltage is too low
Please plug in and recharge
battery
PAPER Problem with ticket paper roll Please check paper
- - - - -
Overloaded
Please remove the item from
the platter and put only
appropriately weighed item(s)
on the platter
Over
When total price exceeds
9999.99 this message is
displayed with beep
Please input appropriate
number within maximum
capacity on the display.
CAL
ERROR
When turning on the scale this
message may be displayed
with continuous beep and it is
automatically turned off.
Please call your CAS dealer.
INIT
ERROR
Please remove the item from
the platter and put only
appropriately weighed item(s)
on the platter.
Error Message
on Receipt
Description Solution
CLOCK IS NOT SET
This error may happen in case
of low backup battery or some
hardware error!
Please call your CAS dealer
when there is still error after
setting DATE & TIME in
MENU -> SET2.
ERROR
POSSIBLE RAM DATA
ARE CORRUPTED!
RESETING ALL RAM
DATA..
PLEASE RESTART
THE SCALE
This message is printed when
the control sums of RAM is
not correct.
In such case the processor
clears the RAM automatically.
And all of sums, settings and
PLU are deleted!
Please call your CAS dealer
ERROR MESSAGES