Chapter 9. SET 1 (Discount, Barcode formatting & HW setting)
This chapter explains how to set BAUD rate, auto power-off, LAN number, discount rate,
barcode format for a single or total, and pulse length for opening cash drawer. In addition
to these, it also describes how to set printing darkness and input currency symbol or name.
Table 7 : SET 1
SET 1 Minimum Maximum Remark
BAUD Rate (bps; bit per sec.)
1200, 2400, 4800, 9600,
14400, 19200, 28800, 38400,
57600, 115200
User should turn off
and on the scale after
setting new "BaudRate".
Auto Power-off timing setting(min.) 1 240
0: No Auto Power-off
Auto power-off works
only in battery usage.
LAN number (#)
This version of POScale does not support network
function. It will be provided in the future.
Discount Rate (%) 0 99
Barcode Format
Cash Drawer-Opening Pulse (ms.) 1 99
Printing Darkness 1 5 Default : 3
Currency Symbol or Name
(characters)
0 3 IRAN Version Max = 4
a. BAUD rate (bps)
BAUD rate is the data-downloading or uploading speed between the scale and PC.
User may set appropriate one of 10 speed options depending on his/her usage environment.
This rate must match the baud rate of the com port(com1, com2, etc) in the PC.
① Press and to go to SET 1 mode.
PROGRAM MODE
To Next Page
Loading...
