CAS PR-II Series - Successive Tare; NOTICE: Tare Function Removal

● Succ
essive tare
③ Place another container on the platter.
EX) 100g of tare.
④ Press TARE key to set zero point.
⑤ After weighing item remove all of the
container from the platter.
⑥ Press TARE key again to set zero.
● NOTICE： To remove TARE funtion press “TARE” Key again after removing the
container from the paltter. Automatic tare clearing function may not be applied to all of PR
series.
11