LOW BATTERY WARNING
This product is a combination product dry battery and rechargeable battery.
When the battery is low the display shows the " bAt-Lo " sign.
You can replace the battery new one.
If rechargeable battery, please charge immediately.
You can shorten battery life.
If you still use the scale without replacing the battery the scale may provide
incorrect result on measurement.
Error Message on
Display
Description
Solution
The "Z-Err" occurs when a current
zero point has shifted from the last
span calibration.
Please call your CAS
dealer.
The "Err" message will be shown
when HIGH and LOW limits are
set as the same or above
maximum capacity
Please reset the weight
again.
The "Err 3" is an overload error.
Please remove the weight.
The "bAt-Lo" is battery low.
Please change new battery.
If rechargeable battery,
please charge immediately.
19
To Next Page
Loading...
Need help?
General
