CAS S2000 Jr. Series - Basic Operation: Power and Zero; Turning Scale On;Off; Zero Function

1
3
d.Tare function
Tare means the weight of container. You may use the tare function when you weigh an item
using a container and measure only the weight of the item.
■ One time tare
① Place a container on the platter.
Ex) 0.200 lbs of tare.
② Press TARE key to set zero point.
EX) 0.200 lbs of tare.
■ Successive tare
① Place another container on the platter.
Ex) 0.100 lbs of tare
② Press TARE key to set zero point
③ After weighing the item remove all of the
containers from the platter.
④ Press TARE key again to set zero.