1
Chapter 3. User’s Set-up Mode
This section explains how to set up the following functions.
Functions Options Remarks
a. Auto power-off NO / 10 / 30 / 60
b. LCD Backlight On/OFF OFF / ON / 3 / 5 / 10
When backlight option selected
in LCD version only
c. Backlight brightness 1 ~ 7 Default 3 (LCD version only)
d. Low battery backlight auto off BL-on / BL-off LCD version only
e. Stand By Mode 0 / 20 / 40 / 60 Only VFD version
f. Printer selection NON / DEP-50 /DLP-50
g. Use TARE in PLU NO / Use
h. Unit Setting of TARE Lb / Kg/Oz Only if (g.) is used
● Press the ZERO key to save the current option and move to the next function setting mode.
● Press the TARE key to move to the next option.
① To get into the “User’s Set-up Mode”, with
the scale power OFF press the ON/OFF
key while pressing and holding the
ZERO key.
To Next Page
Loading...
