2
e. Stand By Mode function (Only VFD version)
This section explains how to set the time until stand by mode.
Options Description Remarks
OFF No Stand By mode.
20 (seconds) Stand By mode in 20 seconds when no use.
40 (seconds) Stand By mode in 40 seconds when no use.
60 (seconds) Stand By mode in 60 seconds when no use. Default
f. Selecting the printer
This section explains how to select the printer option when you’d like to use a printer connected to the
S2000 Jr.
Options Description Remarks
NON No printer in use
DEP-50 DEP-50 printer interface
DLP-50 DLP-50 printer interface
① Press ZERO key to move next function setting,
stand by mode.
② Press TARE key to select a time to stand by
mode.
① Press ZERO key to move next function setting,
selecting the printer
② Select the printer you’re using with S2000 Jr by
pressing TARE key. Ex) DEP- 50
To Next Page
Loading...
