12
⑧ If you want to go back to
the simple weighing mode
just press key twice.
⑨ Suppose that the HIGH
limit and LOW limit are set up
as 2.990kg and 1,990kg
respectively.
If the weight loaded is 2kg
between HIGH and LOW
limit the display shows "OK"
and the scale continues to
beep slowly.
If the weight loaded is above
2.990kg, HIGH limit, the scale
continues to beep rapidly.
6. Counting Function (SW-1C only)
■ Counting without Tare
① Initial display as above. ② Press key twice to go
to sample unit selection
mode.
③ Press key to select
the number of sample unit.
You can select 10, 20, 30,
40, 50, 60, 70, 80, 90, 100,
200, 300,400, or 500 as a
sample unit.
To Next Page
Loading...
