LOW BATTERY WARNING
This product is a combination product dry battery and rechargeable battery.
When the battery is low the display shows the "LowbAt" sign.
You can replace the battery new one.
If rechargeable battery, please charge immediately.
You can shorten battery life.
If you still use the scale without replacing the battery the scale may provide
incorrect result on measurement.
Error Message on
Display
Description
Solution
The "Z-Err" occurs when a current
zero point has shifted from the last
span calibration.
Please call your CAS
dealer.
When HIGH and LOW limit are set
as the same or above maximum
capacity it still shows "Err"
message.
Please reset the maximum
and minimum capacity.
The "d-Err" message will be
shown when HIGH and LOW
limits of comparison functions are
set as inadequate unit value
Please reset the unit value
setting again to be
adequate.
The "Err 3" is an overload error. Please remove the weight
The " LowbAt " is battery low.
Please change new battery.
If rechargeable battery,
please charge immediately.
17
To Next Page
Loading...
