CAS SW-II Series - Changing Unit of Weight; Hold Function

④ Remove container and commodity, then the
display will show the weight of the container
with "-" symbol.
⑤ Press the
key, then display will show
the "0.000".
3. Changing Unit of Weight
● Press the and key
You may select kg, lb, or oz as the unit of weight.
4. Hold Function
When the weight is unstable, ①
press the
key
② " -Fn- " will be displayed
③ Press the
key. Then "hOLd" will be
displayed twice
④ Then average value will be show twice And
the " hOLd " function will be removed
automatically
9