Cascade 23C User Manual

358305557-R2
APPENDIX
FK0777.eps
6 The screen will show "APW" momentarily and then
show the value with the far right digit blinking. Refer
to "Configuration Mode Button Functions" for adding a
preset APW value.
NOTE: The weight's units must match the units of the
indicator. Refer to Service Manual, part no. 6910417,
for Parameter F8 units.
7 After a value is added (or updated), press the "NET/
GROSS" button to accept.
Increase
Value
Decrease
Value
Accept
Value
Shift to the
next digit,
left
Shift to the
next digit,
right
6,7
Configuration Mode Button Functions
Repeat
Steps 5-7
for each
preset APW
8
9
10
3X
Finished
8 Continue to the next APW value, by repeating Steps 5
through 7.
10 The indicator will show "oFF" and then power off. The
indicator is now ready to use.
Programming Preset Average Piece Weight (APW) Values (continued)
9 When all values are added (or updated or viewed), press
the "UNITS" button three times.
Toggle using buttons
"ON/PRINT" (next) or
"TARE" (previous)
Selected digit blinks
Repeat

Cascade 23C Specifications

General

Brand	Cascade
Model	23C
Category	Forklifts
Language	English