41
Accuguide - Steering system
1. To run the Guidance system on your tractor the main switch on
the C column must be activated!
2. Press "Start" or "Autoguidance" Æ The safety instruction appears
Æ press "Accept"
You can only activate AccuGuide if:
Signal is available (see in the top left icon area IN the Display)
The driver is sitting down
No movement of steering wheel
Swath types
Straight Straight line between Point A & B
Heading Set point A and direction northwards
Circle Not typical for Europe
Curve
Records exactly the driven line. If PAUSE is used a number
of straights and curves can combined into one line
Spiral Not typical for Europe
Field
Plan a complete field with inner AB lines and headland
swathes
Multi
Different curves and straights in one field can be recorded
automatically
1
To Next Page
Loading...