Case IH ActiveDrive 8 - Field Recording for Accuturn PRO; Recording a New Field Path; Field Management and Boundary Creation

To Next Page

To Previous Page

Field recording Æ Required for Accuturn PRO

Record new swath: Example: Field

1. First select swath type Field

2. Press the white field Æ "New" and name your

new Field (this is not mandatory)

3. Pe START" and start driving around your

field. Please use the PAUSE button which

appears after pressing Start to capture the

corners of the field.

4. There are two possibilities at the end of the

field  the field will be finished automatically

or with the STOP button.

5. If you want to adjust anything in your field go

to swath manage EDIT.

6. To change between the interior field (AB

Swathes) and the headland use the very left

button.

7. To create a outer boundary use the boundary

button Æ USB drive is required!

Square

Edit

Boundary

If you don´t use the

PAUSE in the corner you

get round corners.

With PAUSE you can

create a corner or

combine 2 straights in a

field with one curve!.