SECTION 2 - CONTROLS, INSTRUMENTS AND OPERATION
2ï96
MONITOR MESSAGES
IMPORTANT: Alarm, warning, error, and information
messages are built into the software to assist the operator
and help prevent baling problems. An example of which
are shown through the following pages.
Operational (1) Page No 2-90
Warning (2) Page No 2-91
STOP (3) Page No 2-95
Error (4) Page No 2-99
Operational messages:
Will inform the operator on normal baler functions by
graphics and can be for example:
Bale drop (shown opposite) Operational Knotters
okay or mistie Operational
Warning messages:
NOTE: These messages have priority on the operational
messages.
They will not keep the operator from baling but can be
considered as driving aids.
An exclamation symbol is part of the message denoting
immediate action is required, for example:
Mistie warning Warning
No_longer_mistie Warning
To Next Page
Loading...