13
Template Name: OML_2_col Rac 0-00000
Template Date: 2001_03_06
2 - SAFETY/DECALS
SAFETY
Understand that your safety and the safety of other
persons is measured by how you service and
operate this machine. Know the positions and
operation of all controls before you try to operate.
MAKE SURE YOU CHECK ALL CONTROLS IN A
SAFE AREA BEFORE STARTING YOUR WORK.
READ THIS MANUAL COMPLETELY and make sure
you understand the controls. All equipment has
limits. Make sure you understand the speed, brakes,
steering stability and load characteristics of this
machine before you start to operate.
The safety information given in this manual does not
replace safety codes, insurance needs, federal, state
and local laws. Make sure your machine has the
correct equipment needed by the local laws and
regulations.
CNH AMERICA, LLC is continuing to work for your
safety by making tractors with better protection and
by providing these rules for safe operation.
● Always sound horn before starting the tractor.
● Before starting the engine, be sure all operating
controls are in neutral or park lock position. This
will eliminate accidental movement of the
machine or start up of power driven equipment.
R106E
● Operate controls only when seated in the
operator’s seat.
R137A
● Securely fasten your seat belt. Your machine is
equipped with a ROPS cab, ROPS canopy or
ROPS frame for your protection. The seat belt
can help insure your safety if it is used and
maintained. Never wear a seat belt loosely or
with slack in the belt system. Never wear the belt
in a twisted condition or pinched between the
seat structural members. Inspect seat belt
webbing, buckle and retractors to ensure they are
not damaged. If damage is apparent, repair
before operating the tractor.
M437A
● A frequent cause of death or serious injury is
persons falling off machinery and being run over.
Keep cab door closed. Instructional seat is used
only for instructing or service diagnosing only. DO
NOT permit others to ride, especially children.
Seat belt (if equipped) must be worn at all times.
M488C
● Before leaving the tractor, stop the engine, put all
controls in neutral or park lock position, remove
the key from the key switch.
R301B
● Stay off slopes too steep for safe operation. Shift
down before you start up or down a hill with a
heavy load. Avoid “free wheeling”.
R123A
● Do not drive on roads, or at high speed anywhere,
with the differential lock engaged. Difficult
steering will occur and can result in an accident.
In field operation, use the differential lock for
traction improvement, but release for turning at
row ends.
R116A
This section gives important safety information for your tractor.
WARNING: THIS SAFETY ALERT SYMBOL INDICATES IMPORTANT
SAFETY MESSAGES IN THIS MANUAL. WHEN YOU SEE THIS
SYMBOL, CAREFULLY READ THE MESSAGE THAT FOLLOWS AND
BE ALERT TO THE POSSIBILITY OF PERSONAL INJURY OR DEATH.
SM171B
Safety Rules
!
! !
To Next Page
Loading...
