Case 446 - Page 37

6. TO TRAVEL FORWARD
a. Move travel control lever slowly and in small increments from the neutral position
toward the full forward position.
b. Release the travel control lever when the desired speed is reached.
c. Return travel
control lever to the neutral position to stop.
d. Depress brake pedal
fully if positioning the travel control lever in neutral does not
bring the tractor to a stop.
7. TO TRAVEL REVERSE:
a. Move travel control lever slowly and in small increments from the neutral position
toward the full reverse position. Do not travel at full speed in reverse.
b. Always keep hand on travel control lever when moving in reverse.
c. Return travel control lever to the neutral position to stop.
d. Depress brake pedal
fully if positioning the travel control lever in neutral does not
bri ng the .tractor to a stop.
Always use extra care and look behind you when driving in reverse.
Do not travel at full speed in reverse.
Do
not travel in reverse down a hill or incline. If necessary, back up to the desired po-
sition and drive down.
8. The travel control lever position determines both speed and power available to the rear
wheels
of the tractor.
In positions other than full speed, the travel control lever position will have to be ad-
justed during operation to compensate for changes in tractive load on the tractor.
4
N
R
E
E
L.J
T
~
A
R
L- ~
•
FIGURE 15
- 24-