To Next Page
C
Carlos StevensSep 23, 2025
How to adjust irregular flow of injection pump in Case 668T/M2?
- DDavid HesterSep 23, 2025
If there is irregular flow of the injection pump in your Case Engine, adjust flow.
How to adjust irregular flow of injection pump in Case 668T/M2?
If there is irregular flow of the injection pump in your Case Engine, adjust flow.
What to do if there is no fuel in Case 668T/M2?
If there's no fuel in the Case Engine's tank, refuel it.
How do I fix a clogged fuel filter in Case 668T/M2 Engine?
If the fuel filter is clogged in your Case Engine, dismantle it and replace it if necessary.
How to clean corroded or loose battery terminals on Case 668T/M2?
If the connections to the battery terminals of your Case Engine are corroded or loose, clean and examine them, then tighten the nuts. If the cable terminals and nuts are excessively corroded, replace them.
What to do if Case Engine air cleaner is blocked?
If the air cleaner in your Case Engine is blocked or deteriorated, clean or replace the filter element.
How to adjust clearance between camshaft cams and tappets in Case Engine?
If there is abnormal clearance between camshaft cams and tappets in your Case Engine, adjust clearance by replacing shims.
How to fix excessive delay in injection pump of Case Engine?
If there is excessive delay in the injection pump of your Case Engine, correct the set?up of the pump.
How to clean fouling in coolant openings in Case 668T/M2?
If there is fouling in the coolant openings in the cylinder head and cylinder groups of your Case Engine, wash following the standards specified for the type of descaling product used.
How to remove air from fuel and injection system in Case Engine?
If there is air in the fuel and injection system of your Case Engine, check that the hoses are not cracked or the unions loose. Replace worn parts, remove the air from the hoses and deaerate the injection pump and fuel filter by unscrewing the caps and working the primer pump by hand.
How to fix incorrect timing of injection pump in Case 668T/M2 Engine?
If the timing of the injection pump is incorrect in your Case Engine, check and correctly time the injection pump.
Description and layout of the engine lubrication system for 4-cylinder engines.
Description and layout of the engine cooling system for 4-cylinder engines.
Diagram and description of the turbocharger system and its components.
Details on the mechanical components of the engine, covering overhaul procedures.
Guidance on diagnosing and resolving engine issues.
Planning of controls and periodic interventions for engine maintenance.
Detailed clearance data for cylinder unit and crankshaft components for 4 and 6 cylinder engines.
General instructions for engine overhaul procedures.
Detailed repair operations for the cylinder unit, including checks and measurements.
Procedures for measuring journals and crankpins, and checking clearances.
Data and assembly procedures for connecting rods, pistons, pins, and bearings.
Procedures for removing valves, checking seals, and supporting surfaces.
Data and checks for intake and exhaust valves, including carbon deposit removal and grinding.
Steps for fitting the cylinder head, including lubrication and sealing rings.
Specific torque values for various screws used in cylinder head and connecting rod assembly.
General