To Next Page
R
robert24Sep 23, 2025
How to adjust irregular flow of injection pump in Case 445T/M2 Engine?
- MMaria CherrySep 23, 2025
If there is irregular flow of the injection pump in your Case Engine, adjust flow.
How to adjust irregular flow of injection pump in Case 445T/M2 Engine?
If there is irregular flow of the injection pump in your Case Engine, adjust flow.
What to do if there is no fuel in Case Engine?
If there's no fuel in the Case Engine's tank, refuel it.
How do I fix a clogged fuel filter in Case 445T/M2?
If the fuel filter is clogged in your Case Engine, dismantle it and replace it if necessary.
How to clean corroded or loose battery terminals on Case 445T/M2?
If the connections to the battery terminals of your Case Engine are corroded or loose, clean and examine them, then tighten the nuts. If the cable terminals and nuts are excessively corroded, replace them.
What to do if Case 445T/M2 air cleaner is blocked?
If the air cleaner in your Case Engine is blocked or deteriorated, clean or replace the filter element.
How to adjust clearance between camshaft cams and tappets in Case Engine?
If there is abnormal clearance between camshaft cams and tappets in your Case Engine, adjust clearance by replacing shims.
How to fix excessive delay in injection pump of Case 445T/M2?
If there is excessive delay in the injection pump of your Case Engine, correct the set?up of the pump.
How to clean fouling in coolant openings in Case 445T/M2?
If there is fouling in the coolant openings in the cylinder head and cylinder groups of your Case Engine, wash following the standards specified for the type of descaling product used.
How to remove air from fuel and injection system in Case Engine?
If there is air in the fuel and injection system of your Case Engine, check that the hoses are not cracked or the unions loose. Replace worn parts, remove the air from the hoses and deaerate the injection pump and fuel filter by unscrewing the caps and working the primer pump by hand.
How to fix incorrect timing of injection pump in Case 445T/M2?
If the timing of the injection pump is incorrect in your Case Engine, check and correctly time the injection pump.
Procedures for overhauling engines with mechanical rotary pumps.
Procedures for overhauling engines with mechanical in-line pumps.
Guidance for diagnosing and resolving engine issues.
Schedule and procedures for planned maintenance.
General instructions for engine overhaul.
Specific operations for engine repair.
Details on assembly and measurements for connecting rod-piston units.
Procedures for removing valves and checking cylinder head.
Torque values for various engine components.
Essential safety rules and precautions for working with the engine.
General