1002-3
Cre 7-80071GB Issued 11-99
FLUIDS AND LUBRICANTS
Lubricants must have the correct properties for each application.
Hydraulic fluid
CASE hydraulic fluid is specially designed for high
pressure applications and for the CASE hydraulic
system. The type of fluid to be used depends on the
ambient temperature.
Temperate climates
-20
°
C to +40
°
C
Fluid type ISO VG 46
CASE reference: POHYDR
Hot climates
0
°
C to +60
°
C
Fluid type ISO VG 100
CASE reference: POHYDC
Cold climates
-40
°
C to +20
°
C
Fluid type ISO VG 22
CASE reference: POHYPF
These various grades of fluid must be in conformity
with CASE France specification P9903201Z.
Temperate climate biodegradable fluid:
This yellow fluid is compatible with standard fluid. If
adopted, it is advisable to drain the circuit completely.
Fluid type ISO VG 46
CASE reference: CASYNTH46
This grade of fluid must be in conformity with CASE
France specification P9903203B
Transmission component oil
Extreme pressure oil used for transmission compo-
nents inside sealed housings.
Extreme pressure oil TYPE API GL5 GRADE 80W90 or
ISO VG 150
Grease
The type of grease to use depends on ambient tem-
perature.
Temperate and hot climates
-20
°
C to +60
°
C
Extreme pressure grease EP NLGI grade 2 with molyb-
denum disulphide.
Cold climates
-40
°
C to +20
°
C
Extreme pressure grease EP NLGI grade 0.
WARNING:
The conditions of use for individual fluids and lubricants must be respected.
!
To Next Page
Loading...
