www.casellasolutions.com
The display may go blank if no keypress is detected during the user
defined display timeout period. The status indictor will flash Red
whilst the display is blank. The display may be ‘woken’ by pressing
either key. To switch the dBadge2 off, press and hold the left hand
key during the 3-2-1 countdown.
Charging
Charge the dBadge2 by placing it in any available ‘pocket’ in the
combined Docking Station & Charger (part 207107B). The charger is
powered using the PC18 universal power adaptor. Note that the left
hand pocket also serves as the USB download interface as indicated
by the symbol.
The dBadge2 display will initially show the battery charge status but
will go blank after approximately 20 seconds; the status indicator will
flash red during charging and will change to steady blue once fully
charged. To ‘wake’ the display whilst charging, press either key or tilt
the Docking Station forward.
To Next Page
Loading...
Need help?
General
