May 2015 Page 18 of 51
Note that the Airwave App described in Section 10 will override Start, Stop, Pause and Auto
Lock modes.
6.7 Reviewing Measurement Run Data
As soon as a measurement run has been stopped, the dBadge2 will automatically display
results from the last measurement run. The display will cycle between the following screens if
the Auto Scroll mode has been selected in the configuration menu (see Section 7) or may be
scrolled manually by pressing either the left ‘L’ or right ‘R’ key.
The screen contents will depend upon the setups selected for D1 (and D2, D3 and octave
band analysis if selected).
ISO View
OSHA View
From the PAUSED screen:-
- to continue the run, press the right ‘R’ key as
prompted by the ‘play’ symbol
- to stop the run, press the left ‘L’ key as prompted
by the ‘ ‘stop’ symbol and a STOP SURE?
confirmation message will appear for 3 seconds
then default back to the PAUSED screen if no
action is taken
- to stop the run, press the right ‘R key as
prompted by the ‘stop’ symbol
- to return to the PAUSED mode press the left ‘L’
key
To Next Page
Loading...
Need help?
General
