7. Specify the high tide time of the custom
point.
●
On the custom point item selection
screen, select [HIGH TIDE].
A Use (A) and (D) to change the high
tide time hour setting.
B Press (C).
C Use (A) and (D) to change the high
tide time minute setting.
D Press (C) to complete the high tide
time registration.
After registration of the information is
complete, a checkmark appears for a
few seconds and then the custom
point item selection screen re-
appears.
Note
●
Pressing (E) during the above
procedure will go back one screen.
8. Specify the latitude and longitude of the
custom point.
●
On the custom point item selection
screen, move the pointer to [LAT./
LON.].
A Use (A) and (D) to specify [N] (north)
or [S] (south) as the latitude direction.
B Press (C).
C Use (A) and (D) to specify a latitude
value.
D Press (C).
E Use (A) and (D) to specify [E] (east) or
[W] (west) as the longitude direction.
F Press (C).
G Use (A) and (D) to specify a longitude
value.
H Press (C) to complete the latitude and
longitude registration.
After registration of the information is
complete, a checkmark appears for a
few seconds and then the custom
point item selection screen re-
appears.
Note
●
Pressing (E) during the above
procedure will go back one screen.
9. Specify the UTC time offset of the custom
point.
●
On the custom point item selection
screen, move the pointer to [TIME
DIFF].
A Use (A) and (D) to change the UTC
time offset.
B Press (C) to complete time offset
registration.
After registration of the information is
complete, a checkmark appears for a
few seconds and then the custom
point item selection screen re-
appears.
Note
●
Pressing (E) during the above
procedure will go back one screen.
10. Specify the DST on/off setting for the
custom point.
●
On the custom point item selection
screen, move the pointer to [DST].
A
Use (A) and (D) to specify [OFF]
(standard time display) or [ON]
(summer time display).
B Press (C) to complete the DST on/off
registration.
After registration of the information is
complete, a checkmark appears for a
few seconds and then the custom
point item selection screen re-
appears.
Watch Operation Guide 3554
52