Casio 3554 - Page 59

●
Configuring World Time Settings with
the Watch
Perform the required operations on the watch
to select a World Time City and to configure
summer time settings for your World Time
City.
●
To select a World Time City
1. Display the current time screen.
l
Watch Mode
2. Use (A) and (D) to select [WORLD TIME].
3. Press (C).
This displays the current World Time City
and the current time there.
World Time City
World Time
4. Hold down (A) for at least two seconds.
This displays the World Time setting
screen.
●
While the setting is being configured,
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
Pointer
5. Use (A) and (D) to move the pointer to
[WORLD TIME CITY].
6. Press (C).
This displays a menu of World Time
Cities.
7. Use (A) and (D) to move the pointer to the
city you want to use.
8. Press (C) to complete the setting
operation.
After the setting operation is complete, a
check mark appears for a few seconds,
and then the World Time setting screen
re-appears.
9. Press (E) to exit the setting screen.
This displays the current time and date in
the selected city.
Note
●
If you select a World Time City with the
CASIO WATCHES phone app and
then change to a different city with a
watch operation, the CASIO
WATCHES city information is deleted
from the watch.
l
To configure World Time settings
with the CASIO WATCHES phone
app
●
Configuring Summer Time Settings
1. Display the current time screen.
l
Watch Mode
2. Use (A) and (D) to select [WORLD TIME].
3. Press (C).
This displays the current World Time City
and the current time there.
4. Hold down (A) for at least two seconds.
This displays the World Time setting
screen.
●
While the setting is being configured,
the watch will exit the setting operation
automatically after about two or three
minutes of non-operation.
Pointer
5. Use (A) and (D) to move the pointer to
[DST].
6. Press (C).
7. Use (A) and (D) to select a summer time
setting.
[AUTO]
The watch switches between
standard time and summer time
automatically.
[OFF]
The watch always indicates
standard time.
[ON]
The watch always indicates
summer time.
8. Press (C) to complete the setting
operation.
After the setting operation is complete, a
check mark appears for a few seconds,
and then the World Time setting screen
re-appears.
9. Press (E) to exit the setting screen.
Note
●
The initial factory default summer time
setting for all cities is [AUTO]. In many
cases, [AUTO] lets you use the watch
without switching manually between
summer time and standard time.
●
While [UTC] is selected as the city, you
will not be able to change or check the
summer time setting.
Watch Operation Guide 3554
59